Stretch Fabric Walls

Product Description

Create a branded background with Stretch Fabric Walls from Banner&Board. A strong, lightweight tubular aluminium frame supports the printed fabric cover.

Use them for exhibitions, photo backgrounds, backdrops and events that need a professional setting.

The 260gsm cover fits closely around the frame, with a bottom zip to maintain tension. Front printing with a white reverse is standard; double-sided printing is also available.

One person can assemble the frame, but we usually recommend two people to apply the graphic. Allow approximately 10 minutes.

Dye-sublimation printing produces a rich, vibrant finish for your artwork.

• Lightweight and strong aluminium frame.
• Includes a bespoke-printed graphic
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost.
• Bespoke-printed graphic on Stretch Fabric.
• Expertly finished by a team of skilled sewing machinists.
• Includes a carry bag that contains the unit hardware for easy portability and transportation. For some of the smaller sized frames, the graphic can also fit inside the carry bag. Larger graphics will need to be transported separately.
• Straight frames only: assembly requires one allen key (included).

An order can contain more than one artwork design without an extra charge, regardless of wall quantity or single- or double-sided printing.

What You Get

• Snap-fit aluminium frame
• Stretch fabric graphic (printed either single or double-sided)
• Allen key (straight frames only)
• Carry bag
• Set of gloves for applying the graphic

Assembly Recommendations

1. Snap together the frame pieces, using the indicated number stickers.
2. Using the included gloves, slide the graphic over the frame. (To avoid the internal hems creating an uneven finish along the edge of the unit, apply the graphic twisted about 30-50mm towards the left or right. Slowly pull the graphic to the bottom of the frame. You will now have part of the rear graphic on the front, or vice-versa. Once the graphic is pulled as far downwards as possible, grip both left and right sides of the frame and twist the graphic into the correct position.)
3. Fasten the zip under the bottom edge of the frame.
4. Straight frames only: using the provided allen key, screw the feet into the frame.

Notice

Stretch Fabric Walls are designed for indoor use only and are not suitable outdoors.

The fabric is not fully opaque, so strong light above or behind the unit may show the frame through the print. Reduce those light sources and adjust the stand’s position to improve the appearance.

Small movements during fabric printing, cutting and finishing can cause minor alignment differences. Avoid wrapping continuous or detailed shapes between front and rear graphics.

Machine-wash graphics at 30° without detergent, then allow them to dry fully before use or storage.

Select the wall size and artwork around the background you want to create. A single-sided print provides a white reverse, while double-sided print can use both faces of the display. Keep lighting above and behind the fabric under control, and avoid detailed elements wrapping between front and rear where small alignment variations could be visible.