Stretch Fabric Economy Stands

Product Description

Build your display around a strong, lightweight tubular aluminium frame and printed cover with Stretch Fabric Economy Stands from Banner&Board.

The close-fitting 260gsm stretch cover is printed on the front with a white reverse as standard, or on both sides if selected. A zip at the bottom secures the fabric under tension.

Single-sided prints have a plain white back. Double-sided covers can repeat a design or show different artwork on each face without an extra charge.

One person can assemble the unit in approximately 5–6 minutes.

• Lightweight and strong aluminium frame
• Includes a bespoke-printed graphic on Stretch Fabric
• Can be ordered either single-sided or double-sided
• Hand sewn and finished
• Includes a carry bag

Dye-sublimation creates rich, vibrant fabric graphics for indoor exhibitions and displays. Fold the cover into the included bag to keep the display lightweight and easy to transport.

The washable cover can be changed easily, with additional and replacement graphics available separately. Old fabric prints can be recycled with other textiles.

What You Get

• Snap-fit aluminium frame
• Stretch fabric graphic
• Carry bag

Specification

Assembly Recommendations

1. Match the indicated numbered stickers and snap together the frame pieces, except the feet.
2. Slide the graphic over the frame.
   • To avoid the internal hems creating an uneven finish along the edge of the unit, apply the graphic twisted about 30-50mm towards the left or right. Slowly pull the graphic to the bottom of the frame. You will now have part of the rear graphic on the front, or vice-versa. Once the graphic is pulled as far downwards as possible, grip both left and right sides of the frame and twist the graphic into the correct position.
3. Fasten the zip under the bottom edge of the frame.
4. Snap the feet to the frame.

Notice

This stand is intended for indoor use only and is not suitable outdoors.

The fabric is not fully opaque, so strong light above or behind the unit may show the frame through the print. Reduce those light sources and adjust the stand’s position to improve the appearance.

Small movements during fabric printing, cutting and finishing can cause minor alignment differences. Avoid wrapping continuous or detailed shapes between front and rear graphics.

Machine-wash graphics at 30° without detergent, then allow them to dry fully before use or storage.

Choose single-sided print with a white reverse when the display needs one main message, or use both faces to present repeated or different artwork. The close-fitting fabric and bottom zip create the tensioned appearance, while a changeable cover allows the frame to be used again with new branding. Consider the lighting position and detailed design elements before ordering so the finished stand works well in its indoor setting.