Replacement Graphics for Torque Indoor Banner Stand
Product Description
Update your Torque Indoor Banner Stand with replacement graphics from Banner&Board.
The stand unit is not included with replacement graphics.
- 2400mm × 2400mm bespoke-printed graphic on either Standard PVC, Double-Sided Block-Out PVC, or Display Polyester.
- Graphic supplied with 40mm diameter pole pockets along top and bottom edges
For the double-sided version, supply two different designs, one per face, at no additional cost compared with repeating the same design on both sides.
Notice
These graphics are sized for hardware supplied by us. A different or non-identical third-party unit may give an incorrect or poor fit.
Include the original order ID when replacing a graphic for a unit previously bought from us. This helps confirm the correct size, particularly if the hardware has changed and current artwork templates differ from those for your model.
Check the existing Torque unit before choosing the replacement graphic. For a double-sided display, plan both faces together: you can repeat one message or use two different designs without a price difference for the artwork. Retaining the original stand and ordering only the print gives your indoor display a fresh appearance.
torque_hero
Downloads / Resources
| File | Size | Download | ||
|---|---|---|---|---|
| Torque Single-Sided 2400mm X 2400mm Template | 2.3mb | |||
| Torque Double-Sided 2400mm X 2400mm Template | 4.3mb | |||
| Spec-Sheet Torque Tension-Stand | 1.3mb | |||