Replacement Graphics for Stretch Fabric Walls

Product Description

Refresh an existing Stretch Fabric Wall or Fabric Exhibition Solution Wall with replacement graphics from Banner&Board.

These prints fit Stretch Fabric Walls bought from us from 1 February 2025 onwards. They do not fit walls bought between June 2019 and 31 January 2025, which are now called Legacy Stretch Fabric Walls.

They also fit all Fabric Exhibition Solution Walls sold between June 2023 and January 2025.

Check the original purchase before ordering. For a Stretch Fabric Wall bought before 1 February 2025, choose Replacement Graphics for Legacy Stretch Fabric Walls instead.

Contact our sales team if you are unsure which replacement version matches your unit.

The stand unit is not included with replacement graphics.

• Bespoke-printed graphic printed on Stretch Fabric.
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost.
• Both single-sided and double-sided graphics include a zip along the bottom.
• Printed on a VUTEk FabriVU 340.
• Finished by a team of sewing machinists.

There is no extra charge for multiple designs within your order, regardless of quantity or single- or double-sided graphics.

Notice

These graphics are sized for hardware supplied by us. A different or non-identical third-party unit may give an incorrect or poor fit.

Include the original order ID when replacing a graphic for a unit previously bought from us. This helps confirm the correct size, particularly if the hardware has changed and current artwork templates differ from those for your model.

Strong lighting above or behind stretch fabric may make the frame faintly visible. Reduce backlighting and reposition the unit to minimise show-through.

Printing designs on both sides may reduce the front image’s vibrancy under some lighting. For the strongest colour appearance, choose a single-sided print with a white reverse.

Small movements during fabric printing, cutting and finishing can cause minor alignment differences. Avoid wrapping continuous or detailed shapes between front and rear graphics.

The graphic matches our material, finishing process and frame dimensions. Compatibility with another supplier’s frame is not guaranteed, so this use is not recommended.

Machine-wash graphics at 30° without detergent, then allow them to dry fully before use or storage.

Identify the original unit before choosing a replacement print. The date distinction applies to Stretch Fabric Walls: the current version is for purchases from 1 February 2025, while the earlier June 2019 to January 2025 range needs Legacy graphics. Fabric Exhibition Solution Walls are covered by the separate compatibility statement above. An original order ID is therefore useful when planning the replacement, especially if several displays were bought at different times.

Once the correct model is established, use the artwork and care guidance to prepare a new message for the existing frame. The graphic can be changed without ordering another wall, and multiple designs may be supplied in one order. Consider lighting, the appearance of both faces and the position of detailed shapes before printing; these choices help the replacement look appropriate on the hardware you already own.